Pubs

B.M. Ross, A. Lakhtakia, C.J. Lissenden, 2007, “Maxwell stress distributions in chiral sculptured thin films due to obliquely incident plane waves,” Optics Communications, Vol. 275, pp. 1-9.

C.J. Lissenden, F. Yan, E.T. Hauck, D.M. Noga, and J.L. Rose, 2007, “Internal damage detection in a laminated composite plate using ultrasonic guided waves,” In: Review in Quantitative Nondestructive Evaluation, Vol. 26B, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics, pp. 1029-1035.

C.J. Lissenden, S.P. Tissot, M.W. Trethewey, and K.P. Maynard, 2007, “Torsion response of a cracked stainless steel shaft,” Fat. Fract. Engng. Mat. Struct. Vol. 30, pp. 734-747.

X. Lei and C.J. Lissenden, 2007, “Pressure sensitive nonassociative plasticity model for DRA composites,” J. Engng. Mater. Tech. Vol. 129, pp. 255-264.

C.J. Lissenden, D. Doraiswamy, and S.M. Arnold, 2007, “Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature,” Int. J. Plasticity, Vol. 23, pp. 1-24.

J.L. Rose, J. Mu, L. Zhang, and C.J. Lissenden, 2006, “Long range focused ultrasonic guided waves for corrosion detection in tubular structures,” NACE Conference proceedings.

H. Shen and C.J. Lissenden, 2005, “Stress and strain localization 3D modeling for particle-reinforced metal matrix composites,” Metall. Mater. Trans., Vol. 36A, pp. 1653-1660.

C.J. Lissenden, J.F. Colaiuta, and B.A. Lerch, 2004, “Hardening behavior of three metallic alloys under combined stresses at elevated temperature,” Acta Mech., Vol. 169, pp. 53-77.

P.A. Solimine and C.J. Lissenden, 2004, “Fatigue of beta titanium alloy at 20, 482, and 648 °C,” Fatigue Fract. Engng. Mater. Struct., Vol. 27, pp. 943-955.

Lissenden, C.J. and N.J. Salamon, 2004, “Design project for advanced mechanics of materials,” Int. J. Engng. Education, Vol. 20, pp. 103-112.

Lissenden, C.J. and X. Lei, 2004, “A more comprehensive method for yield locus construction for metallic alloys and composites,” Exp. Mechanics, Vol. 44, pp.10-20.

Iyer, S.K. and C.J. Lissenden, 2003, “Multiaxial constitutive model accounting for the strength differential in Inconel 718,” Int. J. Plasticity, Vol. 19, pp. 2055-2081.

Lei, X. and C.J. Lissenden, 2003, “Tensile, compressive, and shear response of a particulate reinforced aluminum composite,” Composite Materials: Testing and Design Fourteenth Volume, ASTM STP 1436 C.E. Bakis, Ed. ASTM International, West Conshohocken, pp. 255-271.

Shen, H. and C.J. Lissenden, 2002, “3D finite element analysis of particle-reinforced aluminum,” Mat. Sci. Engng. A, Vol. 338, pp. 271-281.

Lissenden, C.J., 2002, “Discussion: A critical reexamination of classical metal plasticity,” J. Appl. Mech. Vol. 69, p.712.

Lei, X. and C.J. Lissenden, 2001, “Finite element simulation of ausforming of austempered ductile iron components,” J. Manufacturing Science & Engng., Vol. 123, pp. 420-425.

Lissenden, C.J., S.M. Arnold, and A.F. Saleeb, 2001, “Plastic coupling and stress relaxation during nonproportional axial-shear strain-controlled loading,” J. Pressure Vessel Technology, Vol. 123, pp. 81-87.

Lissenden, C.J., M.A. Walker, and B.A. Lerch, 2000, “Axial-torsional load effects of Haynes 188 at 650C,” Multiaxial Fatigue and Deformation: Testing and Prediction ASTM STP 1387, (S. Kalluri and P.J. Bonacuse, Eds.) American Society for Testing and Materials, West Conshohoken, PA, pp. 99-125.

Iyer, S.K. and C.J. Lissenden, 2000, “Initial anisotropy of inconel 718: experiments and mathematical representation,” J. Engng. Materials and Technology, Vol. 122, pp. 321-326.

Lissenden, C.J., S.M. Arnold, S.K. Iyer, 2000, “Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures,” Int. J. Plasticity, Vol. 16, pp. 1049-1074.

Iyer, S.K., C.J. Lissenden, and S.M. Arnold, 2000, “Local and overall flow in composites predicted by micromechanics,” Composites B: Engineering, Vol. 31, pp. 327-343.

Gil, C.M., C.J. Lissenden, B.A. Lerch, 1999, “Unusual nonlinear response of some metallic materials,” Mechanics of Materials, Vol. 31, pp. 565-577.

Lissenden, C.J., C.M. Gil, and B.A. Lerch, 1999, “A methodology for determining rate-dependent flow surfaces for inconel 718,” J. Testing and Evaluation, Vol. 27, pp. 402-411.

Gil, C.M., C.J. Lissenden, and B.A. Lerch, 1999, “Yield of inconel 718 by axial-torsional loading at temperatures up to 649°C,” J. of Testing and Evaluation, Vol. 27, pp. 327-336.

Lissenden, C.J., 1999, “Fiber-matrix interfacial constitutive relations for metal matrix composites,” Composites B: Engineering, Vol. 30, pp. 267-278.

Lissenden, C.J. and S.M. Arnold, 1997, “Theoretical and experimental considerations in representing macroscale flow/damage surfaces for metal matrix composites,” Int. J. Plasticity, Vol. 13, pp. 327-358.

Jian, X.H., H.S. Tzou, C.J. Lissenden, and L.S. Penn, 1997, “Damage detection by piezoelectric patches - free vibration approach,” J. Composite Materials, Vol. 31, pp. 345-359.

Lissenden, C.J., B.A. Lerch, J.R. Ellis, and D.N. Robinson, 1997, “Experimental determination of yield and flow surfaces under axial-torsional loading,” in Multiaxial Fatigue and Deformation Testing Techniques, ASTM-STP 1280 (S. Kalluri and P.J. Bonacuse, eds.) American Society for Testing and Materials, Philadelphia, pp. 92-112.

Lissenden, C.J. and C.T. Herakovich, 1996, “Interfacial debonding in laminated titanium matrix composites,” Mechanics of Materials, Vol. 22, pp. 279-290.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1996, “Inelastic deformation of titanium matrix composites under multiaxial loading,” in Life Prediction Methodology for Titanium Matrix Composites, ASTM STP 1253 (W.S. Johnson, J.M. Larsen, and B.N. Cox, Eds.) American Society for Testing and Materials, Philadelphia, pp. 257-277.

Lissenden, C.J., B.A. Lerch, and C.T. Herakovich, 1996, “Response of SiC/Ti under combined loading - part III: microstructural evaluation,” J. Composite Materials, Vol. 30, pp. 84-108.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1995, “Response of SiC/Ti under combined loading - part II: room temperature creep effects,” J. Composite Materials, Vol. 29, pp. 1403-1417.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1995, “Response of SiC/Ti under combined loading - part I: theory and experiment for imperfect bonding,” J. Composite Materials, Vol. 29, pp. 130-155.

Lissenden, C.J. and C.T. Herakovich, 1995, “Numerical modelling of damage development and viscoplasticity in metal matrix composites,” Comput. Methods Appl. Mech. Engng., Vol. 126, pp. 289-303.

Lissenden, C.J., M-J. Pindera, and C.T. Herakovich, 1994, “Stiffness degradation of SiC/Ti tubes subjected to biaxial loading,” Comp. Sci. Tech., Vol. 50, pp. 23-36.

H. Gao, J.L. Rose, C.J. Lissenden, 2007, “Ultrasonic guided wave mode selection and tuning in composites using a piezoelectric phased array,” IWSHM.

P.K. Puthillath, F. Yan, C.J. Lissenden, J.L. Rose, 2007, “Ultrasonic guided waves for the inspection of adhesively bonded joints,” QNDE.

J.L. Rose, J. Mu, L. Zhang, and C.J. Lissenden, 2006, “Long range focused ultrasonic guided waves for corrosion detection in tubular structures,” NACE Conference proceedings.

C.J. Lissenden, D. Doraiswamy, P.A. Solimine, S.M. Arnold, 2005, “Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature,” In: Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, A.S. Khan and A.R. Khoei, Eds., Neat Press, pp. 217-219.

S.M. Arnold, A.F. Saleeb, L. Powers, C.J. Lissenden, 2005, “High temperature characterization and prediction of Timetal 21S cyclic and cyclic-relaxation deformation behavior using a multimechanism viscoelastoplastic model,” In: Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, A.S. Khan and A.R. Khoei, Eds., Neat Press, pp. 175-177.

M.S. Lebold, M.S., K. Maynard, K. Reichard, M. Trethewey, D. Bieryla, C. Lissenden, D. Dobbins, “Using torsional vibration analysis as a synergistic method for crack detection in rotating equipment,” IEEE Aerospace 2004, March 2004.

Lissenden, C.J., G.S. Wagle, N.J. Salamon, 2002, “Design project for advanced mechanics of materials,” Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition, ASEE.

Lissenden, C.J., G.S. Wagle, N.J. Salamon, 2002, “Applications of finite element analysis for undergraduates,” Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition, ASEE.

Lissenden, C.J. and H. Shen, 2001, “Finite element modeling of discontinuously reinforced aluminum in 2D and 3D,” Affordable Metal-Matrix Composites for High Performance Applications (A.B. Pandey, K.L. Kendig, and T.J. Watson, Eds.) The Minerals, Metals, and Materials Society, Warrendale, OH.

Lissenden, C.J. and R.P. McNitt, “Catastophic failures, designed for failure, and adventures in mechanics one credit freshman mechanics seminars, Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition, ASEE.

Colaiuta, J.F., C.J. Lissenden, and B.A. Lerch, 2001, “Behavior of three metallic alloys under combined axial-shear stresses at elevated temperature,” Proceedings of the Sixth International Conference on Biaxial/Multiaxial Fatigue and Fracture (M.M. de Freitas, Ed.) European Structural Integrity Society, pp. 901-908.

Lissenden, C.J., 2000, “Plastic coupling and stress relaxation during nonproportional axial-shear strain-controlled loading,” in Understanding and Predicting Material Degradation PVP-Vol. 413 (R. Mohan, ed.) ASME, New York, pp. 111-117.

Iyer, S.K. and C.J. Lissenden, 1999, “Initial anisotropy of inconel 718: experiments and mathematical representation,” in Advances in Life Predition Methodology PVP-Vol. 391 (R. Mohan, ed.) ASME, New York, pp. 101-110.

Lissenden, C.J., O.F. Yalcin, and S.K. Iyer, 1998, “Evolution of state in a titanium matrix composite under biaxial tension,” in Proceedings of the Eighth Japan-U.S. Conference on Composite Materials (G.M. Newaz and R.F. Gibson eds.) Technomic, Lancaster, pp. 325-334.

Lissenden, C.J. and S.M. Arnold, 1998, “Effect of microstructural architecture on flow/damage surfaces for metal matrix composites,” in Damage Mechanics in Engineering Materials (G.Z. Voyiadjis, J.L. Chaboche, and J.W. Ju eds.) Elsevier, Amsterdam, pp. 385-400.

Lissenden, C.J. and S.M. Arnold, 1996, “Critique of macro flow/damage surface representations for metal matrix composites,” in Proceedings of the ASME Aerospace and Materials Divisions AD-Vol. 50/MD-Vol. 73 (W.S. Chan, M.L. Dunn, W.F. Jones, G.M. Newaz, P.V.D. McLaughlin, and R.C. Wetherhold, eds.) American Society of Mechanical Engineers, New York, pp. 283-309.

Lissenden, C.J., 1996, “An approximate representation of fiber-matrix debonding in nonperiodic metal matrix composites,” in Damage and Interfacial Debonding in Composites (G.Z. Voyiadjis and D.H. Allen, eds.) Elsevier, Amsterdam, pp. 189-212.

Lissenden, C.J. and C.T. Herakovich, 1994, “Modelling interfacial debonding in titanium matrix composites,” Inelasticity and Micromechanics of Metal Matrix Composites (G.Z. Voyiadjis and J.W. Ju, Ed.) Elsevier Science, Amsterdam, The Netherlands, pp. 239-259.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1994, “Damage induced room temperature creep of titanium matrix composites,” Durability of Composite Materials MD- Vol 51 (R.C. Wetherhold, Ed.) The American Society of Mechanical Engineers, New York, pp. 39-49.

Lissenden, C.J., M-J. Pindera, and C.T. Herakovich, 1992, “Response of SiC/Ti tubes under biaxial loading in the presence of damage,” Damage Mechanics in Composites, (D.H. Allen and D.C. Lagoudas, Eds.) AMD-Vol. 150/AD-Vol. 32, The American Society of Mechanical Engineers, New York, pp. 73-90.

Lissenden, C.J. and C.T. Herakovich, 1992, “Comparison of micromechanical models for elastic properties,” Engineering, Construction, and Operations in Space - Volume 2, (W.Z. Sadeh, S. Sture, and R.J. Miller, Eds.) The American Society of Civil Engineers, New York, pp. 1309-1322.

Iyer, S.K., C.J. Lissenden, and B.A. Lerch, “Plastic flow in inconel 718 under biaxial loading – initial anisotropy,” HITEMP Review 1999, NASA CP-1999-208915/Vol. 2, NASA Glenn Research Center, Cleveland, Paper 34.

Lissenden, C.J., S.M. Arnold, and S.K. Iyer, 1998, “Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures,” NASA TM-1998-208805, NASA Lewis Research Center, Cleveland, OH.

Gil, C.M., C.J. Lissenden, and B.A. Lerch, 1998, “Determination of yield in inconel 718 for axial-torsional loading at temperatures up to 649°C,” NASA TM-1998-208658, NASA Lewis Research Center, Cleveland, OH.

Gil, C.M., C.J. Lissenden, B.A. Lerch, 1998, “An investigation of anomalous behavior in metallic-based materials under compressive loading,” NASA TM-206640, NASA Lewis Research Center, Cleveland, OH.

Lissenden, C.J. and S.M. Arnold, 1997, “Factors influencing inelastic flow under multiaxial stress states: a perspective of their importance to composites,” HITEMP Review 1997, NASA CP-10192, NASA Lewis Research Center, Cleveland, Paper 38.

Gil, C.M., C.J. Lissenden, B.A. Lerch, 1997, “Investigating anomalous behavior in SiC/Ti specimens for flow surface experiments,” HITEMP Review 1997, NASA CP-10192, NASA Lewis Research Center, Cleveland, Paper 39.

Lissenden, C.J. and S.M. Arnold, 1996, “Critique of macro flow/damage surface representations for metal matrix composites,” NASA TM-107321, NASA Lewis Research Center, Cleveland, OH.

Lissenden, C.J., B.A. Lerch, J.R. Ellis, and D.N. Robinson, 1996, “Verification of experimental techniques for flow surface determination,” NASA TM-107053, NASA Lewis Research Center, Cleveland, OH.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1993, “Inelastic deformation of metal matrix composites,” NASA Contractor Report 191522.