Thermal switch discovered in engineered squid-based biomaterials

08/13/2018

Tuning materials for optimal optical and electrical properties is becoming commonplace. Now, researchers and manufacturers may be able to tune materials for thermal conductivity by using a squid-inspired protein made of multiple DNA repeats.

"Controlling thermal transport in modern technologies — refrigeration, data storage, electronics or textiles — is an unsolved problem," said Melik Demirel, professor of engineering science and mechanics and director, Center for Research on Advanced Fiber Technologies at Penn State. "For example, most standard plastic materials have very low thermal conductivity and they are thermal insulators. These squid-based bio-materials that we are working on have low conductivity at ambient humidity, but they can be engineered so that their thermal conductivity increases dramatically."

In this case, the increase is dependent on how many tandem repeats are in the protein, and can be 4.5 times larger than increases seen in conventional plastics as tested by Patrick E. Hopkins, professor of mechanical and aerospace engineering, engineering science and mechanics and physics, University of Virginia. Tandem repeats are repeating strings of DNA that are found in nature, in this case, in squid ring teeth.

One potential use of this bioprotein film might be as a fabric coating, especially for athletic wear, said the researchers. The material could be perfectly comfortable and cozy in everyday use, but when actually used for heavy activity, the sweat produced by the wearer could “flip” the thermal switch and allow the fabric to remove heat from the wearer’s body.

Demirel and his team have designed synthetic proteins that are patterned on tandem repeating sequences. They are able to choose the number of repeats they want and investigate how the various proteins react, in this case, to moisture.

"Under ambient conditions – less than 35 percent humidity — the thermal conductivity of these proteinaceous films do not depend on repeat units or molecular weight, and demonstrate similar thermal conductivities to disordered polymers and water-insoluble proteins," the researchers report today (Aug. 13) in Nature Nanotechnology.

However, when the films are engineered to have higher molecular topology, the thermal conductivity jumps when they become wetter, through high humidity, water or sweat. In collaboration with the University of Virginia team and NIST, the researchers found that as the number of tandem repeats increased, the thermal conductivity did as well.

"Because the thermal conductivity when wet is linearly related to the number of repeats, we can program the amount of thermal conductivity into the material," said Demirel. "So, we could make better thermal switches, regulators and diodes similar to high-performance devices to solve the problems in modern technologies such as refrigeration, data storage, electronics or textiles.”

When the material returns to normal ambient humidity or lower, the switch turns off, and the protein no longer conducts heat as efficiently.

Other Penn State researchers involved in this research are Abdon Pena-Francesch, recent Penn State doctoral recipient and now a von Humboldt Fellow at the Max Planck Institute, Stuttgart, Germany; Huihun Jung, doctoral candidate in engineering science and mechanics; and Benjamin D. Allen, assistant research professor of biochemistry and molecular biology.

Other researchers are John Tomko, graduate student in materials science and engineering, University of Virginia; and Madhusudan Tyagi, assistant research scientist, National Institute for Standards and Technology.

Neutron-scattering experiments were performed at NIST, Center for Neutron Research.  The Office of Naval Research, the Army Research Office and Penn State’s Materials Research Institute supported this work.

 

Share this story:

facebook linked in twitter email

MEDIA CONTACT:

Melik Demirel, Professor of Engineering Science and Mechanics

Melik Demirel, Professor of Engineering Science and Mechanics

 
 

About

The Penn State Department of Engineering Science and Mechanics (ESM) is an internationally distinguished department that is recognized for its globally competitive excellence in engineering and scientific accomplishments, research, and educational leadership.

Our Engineering Science program is the official undergraduate honors program of the College of Engineering, attracting the University’s brightest engineering students. We also offer graduate degrees in ESM, engineering mechanics, engineering at the nano-scale, and an integrated undergraduate/graduate program.

Department of Engineering Science and Mechanics

212 Earth and Engineering Sciences Building

The Pennsylvania State University

University Park, PA 16802

Phone: 814-865-4523