Po-Hsun Huang

Home | About Dr. Huang | Members | Research | Publications | News | Facilities | Openings | Information Center

Po-Hsun Huang

Ph.D Candidate

Biofunctionalized Nano-Electro-Mechanical-Systems (BioNEMS) Laboratory
Department of Engineering Science and Mechanics
Pennsylvania State University
N-302, Millennium Science Complex
University Park, PA 16802-6812

E-mail: pyh5043@psu.edu

I am a PhD student in the department of Engineering Science and Mechanics, The Pennsylvania State University, and currently pursuing my PhD degree with the supervision under my adviser Professor Dr. Tony Jun Huang. My research interests focus on the Micro/Nano-fabrication, Microfluidic and Nanofluidic, Acoustofluidic, Optofluidic, and their applications on biological fields.

Jan. 2012 - current
The Pennsylvania State University. United States
Ph.D. Candidate in Engineering Science and Mechanics

Sep. 2010 - Dec. 2011
University of Michigan-Ann Arbor, United States.
Ph.D. pre-candidate in Mechanical Engineering

Sep. 2006 - June 2008
National Taiwan University, Taiwan.
M.S. in Mechanical Engineering

Sep. 2004 - June 2006
National Taiwan University of Science and Technology, Taiwan.
B.S. in Mechanical Engineering

Sep. 1999 - June 2004
National Kaohsiung University of Applied Science, Taiwan.
A.E. in Mechanical Engineering

• Microfluidics and Nanofluidics
  
• Cell migration and Cell signaling
  
• Microfabrication and Nanofabrication
  
• Manufacturing
  
• Mechanical design
  

Jan. 2012 – Present, BioNEMS Lab, Department of Engineering Science and Mechanics, Pennsylvania State University, USA
Graduate Research Assistant
Research areas: optofluidic, acoustofluidic, microfabrication

Jan. 2010 - Jun. 2010, MSTS Lab, Department of Mechanical Engineering, University of Michigan-Ann Arbor, USA
Graduate Research Assistant

July. 2009 - Jun. 2010, Department of Mechanical Enigneering, National Taiwan University, Taiwan
Full-time Teaching Assistant
Job responsibilities:

Jul. 2008 - Jul. 2009, Ordnance Industry, R.O.C. Army, Taiwan
Second Lieutenant

Jul. 2006 - Jul. 2008, Grace Lab for Polymer Processing, Department of Mechanical Engineering, National Taiwan University, Taiwan
Graduate Research Assistant

Jan. 2005 - Jun. 2006, Precise Manufacturing Lab, Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taiwan
Undergraduate Research Assistant

Jan. 2003 - Jun. 2004 Molding Technology Synergy Lab, Department of Mechanical Engineering, National Kaohsiung University of Applied Science, Taiwan
Undergraduate Research Assistant

July. 2008 - Jun. 2009, Department of Mechanical Enigneering, National Taiwan University, Taiwan
Full-time Teaching Assistant
Job responsibilities: I was responsible for all the grading work, office hours, and tutoring for the courses including Engineering Drawing, Mechanical Design, Mechanics of Materials, Statics, Machining Workshop, Mechanism, and Manufacturing Processes.

• Fellowship, University of Michigan-Ann Arbor (2010-2011)

1. Po-Hsun Huang, Yuliang Xie, Daniel Ahmed, Joseph Rufo, Nitesh Nama, Yuchao Chen, Chung Yu Chan, and Tony Jun Huang, An acoustofluidic micromixer based on oscillating sidewall sharp-edges, Lab on a Chip, Vol. 13, pp. 3847-3852, 2013.
2. Yuchao Chen, Xiaoyun Ding, Steven Sz-Chin Lin, Shikuan Yang, Po-Hsun Huang, Nitesh Nama, Yanhui Zhao, Ahsan Ahmad Nawaz, Feng Guo, Wei Wang, Yeyi Gu, Thomas E Mallouk, and Tony Jun Huang, Tunable Nanowire Patterning Using Standing Surface Acoustic Waves, ACS Nano, Vol. 7, pp. 3306-3314, 2013.
3. Po-Hsun Huang, Han-Ming Chen, Tzu-Chien Huang, and Sen-Yeu Yang, Bubble-free large area replication of microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuuming, Journal of Vacuum Science and Technology B, Vol. 31, 031602, 2013.
4. Po-Hsun Huang, Michael Ian Lapsley, Daniel Ahmed, Yuchao Chen, Lin Wang, and Tony Jun Huang, A Single-Layer, Planar, Optofluidic Switch Powered By Acoustically Driven, Oscillating Microbubbles, Applied Physics Letters, Vol. 101, 141101, 2012. (featured as front cover image)
   
5. Po-Hsun Huang and Sen-Yeu Yang, Complete reversal imprinting for fabricating microlens array with faithful shape replication, Journal of Vacuum Science and Technology B, Vol. 27, pp. 2781-2785, 2009.
   
6. Tzu-Chien Huang, Jing-Tang Wu, Sen-Yeu Yang, Po-Hsun Huang, and Shuo-Hung Chang, Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating, Microelectronic Engineering Vol. 86, pp. 615-618, 2009.
   
7. Po-Hsun Huang, Tzu-Chien Huang, Yi-Ting Sun, and Sen-Yeu Yang, Large-area and thin light guide plates fabricated using UV-based imprinting, Optics Express, Vol. 16, No. 19, pp. 15033-15038, 2008.
   
8. Po-Hsun Huang, Tzu-Chien Huang, Yi-Ting Sun, and Sen-Yeu Yang, Fabrication of large-area resin microlens array using gas-assisted ultraviolet embossing, Optics Express, Vol. 16, No. 5, pp. 3041-3048, 2008.
   
9. Tzu-Chien Huang, Po-Hsun Huang, Sen-Yeu Yang, and Tai-Yu Ko, Improving Flow Balance during Filling a Multi-Cavity Mold with Modified Runner Systems, International Polymer Processing, Vol. XXIII, pp. 363-369, 2008
   
10. Tzu-Chien Huang, Jian-Ren Ciou, Po-Hsun Huang, Kuo-Huang Hsieh, and Sen-Yeu Yang, Fast fabrication of integrated surface-relief and particle-diffusing plastic diffusers by use of a hybrid extrusion roller embossing, Optics Express, Vol. 16, No. 1, pp. 440-447, 2008.
    
11. Sen-Yeu Yang, Fang-Sung Cheng, Sue-Wen Xu, Po-Hsun Huang, and Tzu-Chien Huang, Fabrication of Microlens Arrays Using UV Micro-Stamping with Soft Roller and Gas-pressurized Platform, Microelectronic Engineering, Vol. 85, No. 3, pp. 603-609, 2008.
    
12. Liang-Ting Jiang, Tzu-Chien Huang, Cian-Ren Chiu, Chih-Yun Chang, Sen-Yeu Yang, and Po-Hsun Huang., Direct fabrication of rigid microstructures on a metallic roller using a dry film resist, Journal of Micromechanics and Microengineering, Vol. 18, No. 1, 015004, 2008.
    
13. Sen-Yeu Yang, Tzu-Chien Huang, Po-Hsun Huang, and Tai-Yu Ko, Study on flow imbalance during filling a multi-cavity mold using a H-type runners, Key Engineering Materials, Vol. 364-366, pp. 1306-1311, 2008.
    

1. Po-Hsun Huang, Chung Yu Chan, Daniel Ahmed, Yuliang Xie, Lin Wang, and Tony Jun Huang, “Tunable microfluidic gradient generator via acoustically oscillated sharp edges”, MicroTAS 2013, Freiburg, Germany, Oct. 27-Oct. 31, 2013.
2. Po-Hsun Huang, Yuliang Xie, Daniel Ahmed, Nitesh Nama, Yuchao Chen, Chung Yu Chan, Lin Wang, and Tony Jun Huang, “Acoustofluidic micromixer using acoustically oscillated sharp-edges”, MicroTAS 2013, Freiburg, Germany, Oct. 27-Oct. 31, 2013.
3. Po-Hsun Huang, Daniel Ahmed, Lin Wang, and Tony Jun Huang, “Fast microfluidic mixing via acoustically oscillated sharp edges”, BMES 2013, Seattle, Washington, USA, Sep. 25- Sep. 28, 2013.
4. Po-Hsun Huang, Michael I. Lapsley, Daniel Ahmed, Lin Wang, and Tony Jun Huang, “Acoustofluidic optical switch”, MicroTAS 2012, Okinawa, Japan, Oct. 28-Nov. 1, 2012.
5. Po-Hsun Huang, Michael Ian Lapsley, Daniel Ahmed, and Tony Jun Huang, “Optical switch using acoustically driven microbubbles”, BMES 2012, Atlanta, Georgia, USA, Oct. 24-Oct. 27, 2012.
6. Michael I. Lapsley, Nitesh Nama, Shahrzad Yazdi, Po-Hsun Huang, and Tony Jun Huang, “Investigating Diffusion and Viscosity Using Optofluidics”, BMES 2012, Atlanta, Georgia, USA, Oct. 24-Oct. 27, 2012.
7. Po-Hsun Huang, Tzu-Chien Huang, and Sen-Yeu Yang, “Ultra-thin and large light guide plates fabricated using UV imprinting process”, The 53rd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2009), Marco Island, Florida.
8. Po-Hsun Huang, Jian-Wei Chen, and Sen-Yeu Yang, “Complete reversal imprinting for fabricating microlens array with high height transcription”, The 53rd International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2009), Marco Island, Florida.
9. Tzu-Chien Huang, Sen-Yeu Yang, and Po-Hsun Huang, “Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating,” MNE 2008, Athens, Greece.
10. S.Y. Yang, T.C. Huang, P.H. Huang, and F.S. Cheng, “Large area nanoimprint equipment and processes”, ASNIL 2008, Seoul, Korea. (Invited speech)
11. Sen-Yeu Yang, Tzu-Chien Huang, Yen-Hao Chen, Po-Hsun Huang, and Ying-Ta Chu “The effects of processing parameters on the oxidation of Be-Cu alloy mold inserts in injection molding”, MACRO2008, Taipei, Taiwan.
12. Sen-Yeu Yang, Tzu-Chien Huang, Yen-Hao Chen, and Po-Hsun Huang, “Effects of processing parameters on the form accuracy of plastic aspheric lenses using a Be-Cu mold insert in injection molding process,” 2008 PPS-24, Salerno, Italy.
13. Sen-Yeu Yang, Tzu-Chien Huang, Yen-Hao Chen, and Po-Hsun Huang, “Improving lifetime of BeCu injection mold insert by depositing with Ni-P-PTFE layer on mold surface,” 2008 PPS-24, Salerno, Italy.
14. Po-Hsun Huang, Tzu-Chien Huang, Sen-Yeu Yang, Yi-Ting Sun, and John G. Loeser, “Large-area microlens arrays fabricated by integrated gas-assisted UV-curing embossing with UV-LED array lamp”, EIPBN 2008, Portland, Oregon.
15. Sen-Yeu Yang, Tzu-Chien- Huang, Jian-Ren Ciou, Po-Hsun Huang, and John G. Loeser, “Diffusers with both surface-relief and particle-diffusing functions fabricated using hybrid extrusion roller embossing”, EIPBN 2008, Portland, Oregon.
16. Sen-Yeu Yang, Tzu-Chien Huang, Jian-Ren Ciou, Po-Hsun Huang, and Jing-Tang Wu, “A preliminary experiment of direct transcription of microstructure using extrusion roller-embossing”, ICAM 2007, Tainan, Taiwan.
17. Fang-Sung Cheng, Po-Hsun Huang, Sue-Wen Xu, and Sen-Yeu Yang, “Fabrication of Microlens Arrays Using Soft Roller Embossing with Gas-Pressurized Platform,” MNE 2007, Copenhagen, Denmark.
18. Sen-Yeu Yang, Tzu-Chien Huang, Po-Hsun Huang, and Tai-Yu Ko,” Study on flow imbalance during filling a multi-cavity mold using a H-type runners”, APCOM 2007, Hong Kong, China.