2013 |
| Student | Thesis Title | Thesis Advisor |
|---|
| Abaimov, Mikhail D. | Design of a Microwave Electrothermal Thruster Module for use on a Cubesat Platform | Bilen, Sven |
| Avison, Brian D. | Au and Pd Nanoparticle Formation on Ge and Zn Surfaces | Demirel, Melik |
| Bingaman, Jordan T. | Development of a Microelectronic Device for Measuring Corrosion In-Vivo | Shaw, Barbara |
| Bonner, Matthew J. | Au and Ag Nano-particle Formation on Ge Surfaces | Demirel, Melik |
| Chen, Melody Y. | Imprinted Polyacrylamide Hydrogel Infused with Gold Nanoparticles for Enhanced Biosensing
| Demirel, Melik |
| Corl, Brett H. | Microstructural Evolution of Inconel 617 | Lissenden, Clifford |
| Elsworth, Cooper W. | Analysis and Validation of an Overset Fluid-Structure Interaction Solver | Pitt, Jonathan |
| Forgie, Kevin D. | Advanced Lead Selenide Quantum Dot Solar Cells Utilizing the Light and Carrier Collection Management Architecture | Fonash, Stephen |
| Foster, Bryant K. | Utilization of Milling to Alter the Properties of Composite Ni-hBN Powder for Use in Cold-Sprayed Self-Lubricating Coatings | Segall, Albert |
| Giordano, Joseph A. | The Effects of Active Area Geometry on Laminated Piezoelectric Actuator Performance | Cusumano, Joseph |
| Hegarty, Sean P. | The Effects of Laser-Sustained Plasma on the Surface Characteristics of Alumina | Segall, Albert |
| Kelly, Michael A. | The Chemical Exfoliation of Hexagonal Boron Nitride for Radiation Sensing | Robinson, Joshua |
| Korovin, Alan Y. | A Comparative Analysis of Commercial Fluid Structure Interaction Software | Miller, Scott |
| Latsha, Tyler S. | Autoignition Behavior of a Soybean Derived Biodiesel Fuel and
a Methyl Ester Surrogate Blend
| Boehman, Andre |
| Liang, Xiaoming . | Active Suspension for V2V and V21 Learning of Road Comfort | Brennan, Sean |
| Lin, Keith H. | Optical Responses of Rat Somatosensory Cortex During Whisker Stimulation | Alloway, Kevin |
| Liu, Zhisheng . | Impact Modeling of High Strain Rate Deformation during Cold Spray | Smid, Ivica |
| Maranan, Vincent John C. | Design and Processing of an Additive Manufacturing Component | Palmer, Todd |
| McCrory, Duane J. | Defects in CdTe Solar Cells using Multiple Frequency EPR/EDMR Techniques | Lenahan, Patrick |
| McGowan, Joshua B. | Light Concentration via Waveguide Surface Curvature | Giebink, Noel |
| Merkel, Elyse A. | Jaipur Foot and Polyurethane Foot: Analysis of Static Ankle Rotation Testing | Slattery, Margaret |
| Mo, Chen . | Temperature Effects and Current Stability in Power MOSFETs | Awadelkarim, Osama |
| Nunez, Michael . | Magnesium/Aluminum Thin-Film Alloys Fabricated
using Biased Target Sputter Deposition
| Horn, Mark |
| Pigott, Michael G. | Identifying Defects in Cd-Te Solar Cells using Electron Paramagnetic Resonance | Lenahan, Patrick |
| Rineer, Ian H. | Development of a Cathode Material for use in an Environmentally Friendly Reserve Battery | Shaw, Barbara |
| Roher, Thomas A. | Modeling Low Field Resonance | Lenahan, Patrick |
| Rufo, Joseph M. | Developing Lab on Chip Devices for Flow Cytometry and Fluorescence Activated Cell Sorting | Huang, Tony |
| Scheetz, Bryan M. | The Effect of Mixed Surface Chemistry on Fibrinogen Activity and Platelet Adhesion | Siedlecki, Christopher |
| Schmitthenner, David H. | Effectiveness of Video Tutorials for Machine Training:
Impact on Knowledge and Self-Efficacy
| Simpson, Timothy |
| Signorino, Anthony C. | Failure Probabilities and Failure Mode Competition in a Thin Rod | Cusumano, Joseph |
| Slotcavage, Daniel J. | Investigations of Proximity-Induced Superconductivity in Platinum Nanowires
| Mallouk, Thomas |
| Steiner, Jonathan M. | Electrolyte Evaluation for use in Green Batteries | Shaw, Barbara |
| Then, Ronald B. | Ultrasonic Guided Wave Defect Detection Tool for Use in Deep Natural Gas Storage Wells | Rose, Joseph |
| Trevitz, Daniel S. | Mechanical Design, Modeling, and Control of a Three Degree-of Freedom Parallel Mechanism Implemented on a Quadruped Robot | Brennan, Sean |
| Wei, Sheng . | Characterization of the Effect of Magnetic field on Laser Sustained Plasma (LSP) | Todd, Judith |
| Weigle, John D. | Nonlinear Acoustic Solutions for the Nondestructive Evaluation of Alloy 617 | Lissenden, Clifford |
| Werner, Samuel H. | Determining the Efficacy of Supplementing Artificial Pacemaker Batteries with Piezoelectric Energy Harvesters Implanted in the Human Body | |
| Xiao, Xuerong . | Spin and Orbital Angular Momentums of Multiple Trains of Same-Colored Surface Plasmon-Polaritons Guided by the Planar Interface of a Metal and a Sculptured Nematic Thin Film | Lakhtakia, Akhlesh |
| Young, Liam A. | Detecting Defects in CdTe Solar Cells Using EPR Spectroscopy | Lenahan, Patrick |
2012 |
| Student | Thesis Title | Thesis Advisor |
|---|
| Anders, Mark A. | Interface Defects in SiC pMOSFET Devices | Lenahan, Patrick |
| Anderson, Benjamin A. | Analysis of silicon Carbide for Use as a Low-K Dielectric in Microelectronic Applications | Lenahan, Patrick |
| Chu, Xiang . | An Evaluation of commerically Available Magnesium alloys for Possible Anodes in Environmentally Responsible "Green" Batteries" | Shaw, Barbara |
| Daveler, Brandon J. | The Design and Analysis of the elbow for a 30ft tall Exoskeleton | Smid, Ivica |
| Dodson, Abigail L. | The viable Desiccation of Moringa Oleifera in High Humidity Environments | Schuhmann, Richard |
| Ebersole, Chad M. | An Investigation of the electron Transport Mechanisms in Silicon Carbide for use as a Low-K Dielectric | Lenahan, Patrick |
| Finizio, Nicholas P. | Inhibition of Cancer Cell Migration using Nanoparticle-Based Drugs | Zhang, Sulin |
| Gavin, Robert E. | Improved Reaction force Isolation Motor Simulation and Design | Marsh, Eric |
| Githens, Alan S. | Preliminary Exploration of Diamond Formation at Atmospheric Pressure Using Laser Sustained Plasmas | Todd, Judith |
| Glickstein, James J. | Investigation of Metallic Contacts to Indium Nitride | Mohney, Suzanne |
| Gresh, Robert W. | Development of EBPVD Anode Material for use in "Green" Battery | Shaw, Barbara |
| Guo, Xiang . | Standing surface Acoustic Waves and Lab on Chip Devices | Huang, Tony |
| Jaffe, Matthew S. | Lepton Flavor Violating Decay and the Search at the LHC | Huang, Tony |
| Kalupson, James F. | High Power Density Carbon Nanotube Mats for Ultracapacitor Applications | Rajagopalan, Ramakrishnan |
| Kauffman, Justin A. | Simulation of Hydrocephalus Based on Mathematical Modeling and Technological Advancements | Drapaca, Corina |
| Lewinsohn, Matthew A. | The Use of Tin Sulfide as the Semiconductor in Thin Film Solar Cells | Horn, Mark |
| Meholic, Bradley S. | The Examination of the Patterns of Bi-Lateral Ground Reaction Forces during Quiet Standing | Challis, John |
| Merola, Joseph J. | Dielectric Properties of Thin-Alkali -Free Glass | Lanagan, Michael |
| Miller, Amy E. | Instrumentation for Spatially Resolved Measurements of Optical Emission from Fluorescent Materials | Lakhtakia, Akhlesh |
| Mitchell, Luke R. | Characterizing Scalp EEG Signatures during Action Observation and Imagery | Schiff, Steven |
| Morse, Alexander J. | Characterization of Proton Conductive Membrane for a CuCl Electrolyzer | Lvov, Serguei |
| Mulvaney, Kathleen M. | The Effect of Added Carbon dioxide on the Relationship between Chemiluminescence and flame Heat Release in Premixed Natural Gas Combustion Systems | Santavicca, Domenic |
| Mutch, Michael J. | DESIGN AND SENSITIVITY IMPROVEMENT OF A K-BAND SPECTROMETER | Lenahan, Patrick |
| Myers, Grant E. | Microwave Regeneration of a Desiccant Wheel Humidification System | Agrawal, Dinesh |
| Naccarelli, Anthony J. | Development, Characterization, and Testing of Anode Components for a Biodegradable Seawater Battery | Shaw, Barbara |
| Nalevanko, Nathan R. | Grand Challenges of Controlling Dioxin Emissions from Residential Waste Burning | Dempsey, Brian |
| Omelchenko, Stefan T. | The Thermal Conductivity of Solid 4HE in Vycor | Chan, Moses |
| Pack, Min Y. | Universalizing Design through the use of Lego-Inspired Connectors | Segall, Albert |
| Perlitz, Daniel A. | Cavitation and its Visual Localization | William Bonnes |
| Petersen, Daniel J. | A Planar Model of the Knee to Characterize the Effects of Osgood-Schlatter Syndrome on Knee Mechanics | Piazza, Stephen |
| Pheil, Christiane E. | Fabrication and Testing of High-Tempature Ultrasonic Transducers | Tittmann, Bernhard |
| Pisupati, Aditya . | The Minimal Cost of Blood flow: Murray's Law Revisited | Drew, Patrick |
| Ranjeva, Sylvia L. | Post-Infectious Hydrocephalus in Ugandan Infants: Microbial Orgins of Infection and the Role of climate Disease Distribution | Schiff, Steven |
| Schuppert, William J. | Construction of Compact EDMR Spectrometer with Tank Circuit Analysis
| Lenahan, Patrick |
| Schwartz, Evan T. | A High Beat Ratye Study of a Horizontally-Positioned Pediatric Ventricular Assist Device | Manning, Keefe |
| Smith, Daniel C. | Ni/Cu Encapsulated Micron-Sized Particles for cold-spray Deposition | Smid, Ivica |
| Strait, Timmy L. | Exploratory Study of Hafnium Nitride and Zirconium Nitride Formation using Laser Sustained Plasma | Todd, Judith |
| Thompson, Lee F. | Noise Souce Localization in Reverberant Environments | Capone, Dean |
| Trella, Ryan M. | Durability of Carbon Fiber Reinforced Composites for Driveshafts | Bakis, Charles |
| Wolfe, Derek S. | Sterilization of Magnesium Alloys for In-Vivo Corrosion Experimentation | Shaw, Barbara |
| Yau, Allison . | Hydrogen Generation with Nanotextured Cobalt Catalyst | Demirel, Melik |
| Yoder, Joseph C. | Characterization of Porous Nickel Electrodes | Smid, Ivica |
2011 |
| Student | Thesis Title | Thesis Advisor |
|---|
| Acquaviva, Joseph P. | Low Field Electrically Detected Magnetic Resonance | Lenahan, Patrick |
| Al Balushi, Zakaria Y. | Multiple Self-Aligned Silicon Nanowire Arrays Catalyzed from Bulk Gold Reservior | Fonash, Stephen |
| Barber, Kathryn I. | Design of a Tri-Phasic Biomechanical Model Describing Healthy and Cancerous Tissue | Drapaca, Corina |
| Beers, Benjamin R. | Investigating Geometrical Configurations of a Hobby-Scale Pulsejet Engine for Maximum Thrust Efficiency | Micci, Michael |
| Bimber, Beth A. | IMPLANTABLE MICROELECTRONIC DEVICES FOR MEASURING IN VIVO CORROSION OF MAGNESIUM ALLOYS | Shaw, Barbara |
| Burak, Joshua L. | IMPLANTING THIN FILM TRANSISTORS INTO BRAIN TISSUE VIA POLYETHYLENE GLYCOL DIP COATING | Gluckman, Bruce |
| Cheng, Jenny . | Map-Guided Power Chair Automation and Driver Assistance | Brennan, Sean |
| Cook, Daniel R. | Corrosion Optimization for Magnesium Alloys for Use in Cardiac Stents | Sikora, Elzbieta |
| Devlin, Patrick J. | Stability Properties and Validation of a CPG-Based Walking Model | Cusumano, Joseph |
| Filko, Brian J. | Terrain Visulation and Human-Terrain Interaction Using an Immersive Driving Simulator | Brennan, Sean |
| Hackman, Daniel S. | Modeling a Yagi-Uda Nanoantenna: Focusing Visible Spectrum Light with Metallic | Huang, Tony |
| Haupt, Frank A. | Synthesis and Characterization of PFA-Derived Ultra Thin Carbon Film
| Lanagan, Michael |
| Heinrichs, Holly E. | Assessment of Surface Damage of Dopied Silicon Under Laser Processing for Use In Photovoltaics | Ashok, S. |
| Hemmerle, Michael J. | Electrical Properties of Tantalum Oxide Thin Film Capacitors | Lanagan, Michael |
| Kandt, Arwen R. | CONDUCTIVITY AND PERMEABILITY OF ION CONDUCTIVE MEMBRANES FOR COPPER CHLORIDE ELECTROLYSIS | Lvov, Serguei |
| Ketterman, Matthew D. | High Permittivity Materials for Image Enhancement in MRI | Neuberger, Thomas |
| McDonald, Ryan P. | Electroloss Deposition of Platinum Onto Porous Nickel Electrodes | Smid, Ivica |
| Miller, Daniel J. | Braided Carbon Fibers That Are Vacuum Assisted Transfer Molded VS Filiment Winding of Rotorcraft Composite Driveshafts: Manufacturing and Analysis | Bakis, Charles |
| Nohar, Ravendra M. | Accelerated Sleep: Automatic State of Vigilance Detection for Implantable Neural Devices | Gluckman, Bruce |
| Pavletich, Mark D. | Performance of Coal Tar Pitch Derived Carbons for Non-Aqueous Electric Double-Layer Capacitors | Rajagopalan, Ramakrishnan |
| Robinson, David E. | Interface Characterization of Artillery Barrel Surface Coatings | Segall, Albert |
| Rydzewski, David A. | MATERIAL PHYSICS STUDY OF SIC MOSFETS | Lenahan, Patrick |
| Salk, Travis . | Magnesium Alloy Corrosion as a Function of Alloy Composition and Processing | Shaw, Barbara |
| Sauter, Paul C. | Radiated Noise Model Development of a Maneuvering Surface Ship | Lemmon, David |
| Shaham, Noam . | Arm Swing Asymmetry as an Early Biomarker for Parkinson's Disease | Cusumano, Joseph |
| Shao, Rukan . | A Study of Neuronal Volume Change Using the Wilson Cowan Model | Drapaca, Corina |
| Smalley, Joseph S. | High Contrast Nanoplasmonic Modulator Based on Dual-Frequency Liquid Crystals | Huang, Tony |
| Smith, Stephen D. | Strength and Stiffness of Flexible Matrix Composites for Rotorcraft Drive Shafts | Bakis, Charles |
| Storey, Matthew J. | UNDERSTANDING AND IMPROVING DEFECTS IN SILICON CARBIDE SEMICONDUCTOR DEVICES | Lenahan, Patrick |
| Thakur, Tanvi K. | DYE UPTAKE IN DYE SENSITIZED SOLAR CELLS | Horn, Mark |
| Vadella, Robert J. | Development of Environmentally Responsible "Green" Magnesium Batteries | Shaw, Barbara |
| Weikert, Kevin D. | Development of Resorbable Mg Alloys for Hyman Implants | Shaw, Barbara |
| Wilton, Samuel R. | Employing Infrared Emitting Lead-Selenide Quantum Dots in Luminescent Solar Concentrators: A Monte-Carlo Study | Xu, Jian |
2010 |
| Student | Thesis Title | Thesis Advisor |
|---|
| Autz, Arthur J. | A Bi-Modulus Composite: Synthetic Anterior Cruciate Ligaments | Bakis, Charles |
| Bennett, Geoffrey N. | Photovoltaics Future: Resource Availability, Environmental Factors, and Manufacturing Issues | Ashok, S. |
| Byrne, Timothy M. | Analysis of the Removal Capabilities of Intermittently and Continuously Run Slow Sand Filters | Dempsey, Brian |
| Chiang, I-Kao . | Dance-Texture Analysis and Synthesis from Motion Capture Data | Liu, Yanxi |
| Endler, Heather L. | In Vitro Testing of New MG-Based Biomaterial | Shaw, Barbara |
| Helms, Tristan P. | A GAAS MAGNETIC MULTILAYER SPIN DEVICE | Samarth, Nitin |
| Herwig, Nicholas L. | Design Optimization of Duct Lip-Spoilers for Ducted Fan VTOL-UAV's | Camci, Cengiz |
| Hoover, Jason L. | Experimental Testing of Traffic Jam Initiation Using Robot Swarms | Brennan, Sean |
| Howells, Jonathan E. | Attenuation Measurements in Concrete by Means of Rayleigh Surface Waves | Lissenden, Clifford |
| Howsare, Casey A. | Parametric Studies of Graphene Synthesis by Chemical Vapor Deposition on Copper Substrates | Robinson, Joshua |
| Klodowski, Daniel F. | Designing and Analyzing the Turbocharging of a Hydrogen-Fueled Internal Combustion Engine in a Hybrid Vehichle | Anstrom, Joel |
| Lani, Shane W. | Design of an Unsteady Aerodynamic Force Measurement System | Krane, Michael |
| McCorkel, Wade H. | Design and Implementation of an Electronic Fuel Injection System for a Hydrogen Internal Combustion Engine in a Hybrid Vehicle | Anstrom, Joel |
| Palocaren, Antony J. | Biomechanical Modelling of Biological Tissues: Importance to Tumor Classification | Drapaca, Corina |
| Ranjeva, Minna L. | Optimization of a Hybrid,Small, Decentralized Power Plant | Kulkarni, Anil |
| Rudolph, Michael T. | Modeling Acoustic Echoes from Bubbly Water | Culver, R. Lee |
| Russo, Benjamin M. | A Comparison of Measurement and Simulation Techniques for Finding Reverberation Time at Diverse Locations in a Performance Venue | Barber, Christopher |
| Semrau, Stephanie M. | Characterization of Cell Dynamics by Use of Substrates with Changing Rigidity | Zhang, Sulin |
| Smith, Katelyn J. | Evaluation of the Criteria for Crack Propagation in the Presence of High Surface Stresses | Segall, Albert |
| Stokes, Sean M. | Self-Folding PDMS Polymer Films in Response to Capillary Forces | Demirel, Melik |
| Tu, Aimee . | Water Absorption and Characterization on Alkanethiol Self-Assembled Monolayers on Gold | Kim, Seong H. |
| Veledar, Osman . | A STUDY OF CHAIRI MALFORMATIONS USING MAGNETIC RESONANCE ELASTOGRAPHY
| Drapaca, Corina |
| Wetherington, Maxwell T. | Chemically Modifide Graphene for Ultracapacitor Applications | Robinson, Joshua |
| Woolridge, Jillian J. | Development of a User Interface in Matlab to Assist Precision Ultrasonic Thickness Mapping | Koudela, Kevin |
2009 |
| Student | Thesis Title | Thesis Advisor |
|---|
| Anderson, Michael K. | CONTROLLED RELEASE PROPERTIES OF POLY (P-XYLYLENE) POLYMERIC THIN FILMS | Demirel, Melik |
| Basantani, Hitesh A. | ABSTRACT: EFFECTS OF LITHOGRAPHIC PROCESSING ON UN-COOLED IR MATERIALS | HORN, MARK |
| Bauknight, Dustin K. | ASYMMETRIC ELECTROCHEMICAL CAPACITOR ELECTRODE DESIGN AND CHARACTERIZATION | LANAGAN, MICHAEL |
| Bogniak, Jessica L. | UTILIZATION OF NANOSTRUCTURED POLY (P-XYLYENE) FILMS AS ANTIMICROBIAL SURFACES | DEMIREL, MELIK |
| Bontempo, Brian A. | CONDUCTION MECHANISMS IN TANTALUM OXIDE AS A FUNCTION OF RAPID THERMAL ANNEALING TEMPERATURE | LANAGAN, MICHAEL |
| Bugos, Nicholas C. | Climate Change Legislation and its Impact on Baseload Power Plant Economics | Farber, Darryl |
| Decesar, Brennan L. | PARAMETER OPTIMIZATION OF LASER-FIRED BACK CONTACT SILICON SOLAR CELLS | REUTZEL, EDWARD |
| Hitchcock, Miranda E. | Culturally Appropriate Design of a Pedal-Powered Electric Generator System for an Eco-Village Prototype in Kenya. | Colledge, Thomas |
| Hopkins, Jeffrey R. | INVESTIGATING POWER TRANSFER EFFICIENCY FOR A LOW POWER RADIO FREQUENCY ELECTROTHERMAL THRUSTER | BILEN, SVEN |
| Jacobs, Scott B. | NEW SCORING RUBRIC FOR THE 21ST CENTURY AUTOMOTIVE CHALLENGE | ANSTROM, JOEL |
| Koch, Benjamin T. | MONTE CARLO SIMULATION OF LAMINAR COMPOSITE BREAKDOWN IN DC FIELD | LANAGAN, MICHAEL |
| Koytek, Stephen M. | METALIZED PARLYLENE AS A SURFACE ENHANCEMENT FOR QUANTITATIVE RAMAN SPECTROSCOPY ANALYSIS OF CREATININE IN URINE | DEMIREL, MELIK |
| Kozlowski, Scott M. | CHARACTERISTICS OF THIN-FILM TANTALUM OXIDE ON FLEXIBLE POLYMER SUBSTRATE CAPACITORS | LANAGAN, MICHAEL |
| Krefta, Lydia E. | ELECTRICAL CHARACTERIZATION OF PLANAR POWER MOSFETS | SULIMAN, SAMIA |
| Malinowski, Owen M. | Development of an Ultrasonic Guided Wave Scanning Probe for the Detection of Bonding Defects in Adhesively Bonded Aircraft Repair Patches | Rose, Joseph |
| Mattes, Richard J. | INTELLIGENT FARMING USING MODULAR MOBILE ROBOTS | BRENNAN, SEAN |
| Moses, James M. | ELECTRICAL CHARACTERIZATION STUDIES OF BIPOLAR PROCESSED HYBRID PLANAR SILICON MOSFETS | SULIMAN, SAMIA |
| Ostrich, Adam E. | THE USE OF CONDUCTIVE CARBON FILMS AS ELECTROMECHANICAL PRESSURE SENSORS ON HELICOPTER BLADES | SMITH, EDWARD |
| Ostrowski, Chad A. | Exploration of Novel Heterostructure Semiconductors to Create Energy Efficient, Tunnel Transistors | Datta, Suman |
| Pytel, Nicholas C. | IMPLANT DESIGN FOR REAL TIME IN VIVO ANALYSIS OF A NOVEL BIOABSORBABLE MAGNESIUM ALLOY | SHAW, BARBARA |
| Smith, Sally M. | Dynamical Geometry of Inter-Stride Fluctuations | Cusamano, Joseph |
| Stern, Daniel E. | Separation of Particles in a Microfluidic Channel Via Acoustic Streaming of Microbubbles | Huang, Tony |
| Ulizio, Michael A. | NANOPARTICLE ASSEMBLY IN NANOSTRUCTURED PPX FILMS | DEMIREL, MELIK |
| Van Pelt, Jacqueline G. | Magnesium Alloys for Use in Bioabsorable Cardiac Stents | Shaw, Barbara |
| Wachs, Trevor A. | Characterizing Hydrodynamics Stability waves, Surface Phenomena and Mass Removal Paraffin in a Hybrid Rocket Motor | Kenneth, Kuo |
2008 |
| Student | Thesis Title | Thesis Advisor |
|---|
| Graves, Kevin M. | EDUCATIONAL PHOTOVOLTAIC SYSTEM PROJECT FOR ENGINEERING DESIGN COURSE | Colledge, Thomas |
| Hedrick, Brittany L. | CHARECTERIZATION AND OPTIMIZATION OF QUANTUM DOT WHITE LIGHT LEDS | Xu, Jian |
| Howorth, Kevin R. | DESIGN AND CHARACTERIZATION OF DOUBLE LAYER CAPACITORS FORMED WITH ORGANIC ELECTROLYTE AND ACTIVATED CARBON | LANAGAN, MICHAEL |
| Katz, Eli R. | DEVELOPMENT OF EDUCATIONAL DATA ACQUISITION TRAINING MODULES FOR COMMUNITY SERVICE ENGINEERING PROJECTS | COLLEDGE, THOMAS |
| Li, Ang | DEVELOPMENT OF BIO-ABSORBABLE MATERIAL VIA PHYSICAL VAPOR DEPOSITIONFOR USE IN CARDIAC STENT AND ORTHOPEDIC IMPLANT | HORN, MARK |
| Lopez Viana, Santiago | COFFEE STAIN PARTICLE ASSEMBLY TECHNIQUE | FONASH, STEPHEN |
| Love, Russell G. | DEVELOPMENT OF A MANUAL ULTRASONIC GUIDED WAVE SHORT RANGE PIPELINE INSPECTION SYSTEM | ROSE, JOSEPH |
| Marko, Tomas | CONTROLLING TOPOLOGY OF PARYLENE THIN FILMS THROUGH OBLIQUE ANGLE RADICAL VAPOR DEPOSITION | DEMIREL, MELIK |
| Medina, Tim J. | PRESSURE DRIVEN CONTINUOUS FLOW SEPARATION OF DNA IN NANOCHANNELS | FONASH, STEPHEN |
| Nassar, Abdalla R. | CHARACTERIZATION OF LASER PRODUCED TITANIUM PLASMA | SEGALL, ALBERT |
| Nguyen, Nghia D. | ELECTROCHEMICALLY GROWING GOLD NANOWIRES USING PDMS TEMPLATES AND PLATING SOLUTION | FONASH, STEPHEN |
| Pagliocca, Stacy A. | ADHESIVE LAP JOINT TESTING FOR AIRCRAFT STRUCTURES | LISSENDEN,CLIFFORD |
| Parchuri, Bobby A. | ULTRASONIC GUIDED PHASED ARRAYS FOR TESTING THIN SHEETS | ROSE, JOSEPH |
| Purcell, Brendan P. | CONTROLLING MORPHOLOGY OF NANOSTRUCTURED POLY (P-XYLYLENE) FILMS | DEMIREL, MELIK |
| Scott, Dana M. | LASER PLASMA SURFACE MODIFICATION OF TITANIUM SUBSTRATES | TODD, JUDITH |
| Sollenberger, Stanton G. | EVALUATION OF STRESS CONCENTRATIONS IN MISALIGNED FLEXIBLE MATRIX COMPOSITE DRIVESHAFTS | SMITH, EDWARD |
| Stern, Keith A. | ANALYSIS OF MAGNESIUM ALLOY MATERIALS FOR BIORESORBABLE BONE PLATES | SHAW, BARBARA |
| Stratton, Zackary S. | TUNABLE FLUID LENS FOR ON-CHIP LIGHT FOCUSING TO ENABLE SINGLE PARTICLE DETECTION | HUANG, TONY |
| Verlinich, Matthew M. | EXPLORATION OF THE EFFECT FREQUENCY HAS ON ULTRASONIC PRODUCTION OF BIODIESEL | TITTMANN, BERNHARD |
| Winter, Christopher A. | ELECTRICAL CONTACT AND CHARACTERIZATION OF SILICON NANOWIRE MESH FOR SENSOR APPLICATIONS | FONASH, STEPHEN |
ESM News Feed