Binet, Chantel

Binet, Chantel

Research Assistant in the Center for Innovative Sintered Products

Office phone: (814) 867-1572
Office address: 149 RESCH-W
E-mail: cub9@psu.edu

Degrees with Fields, Institution, and Date

  • Ph.D., Engineering, Universite du Quebec a Chicoutimi (UQAC), QC, Canada, 2001
  • M.Sc., Genie metallurgique et des materiaux, Materials Processing, Ecole Polytechnique de Montreal, QC, Canada, 1996
  • B.S., Genie metallurgique et des materiaux, Materials, Ecole Polytechnique de Montreal, QC, Canada, 1994

Number of Years of Service on This Faculty (8 years)

  • May 2001 – Present Materials Process Researcher in the Center for Innovative Sintered Products

Other Related Experience — Teaching, Industrial, Etc.

  • Apr 2000 – May 2001 Materials R&D Project Engineer, Small Caliber, SNC Technologies, LeGardeur, QC, Canada
  • Sept 1996 – Apr 2000 Research Assistant, Goupe de Recherche en Ingénierie des Procédés et Simulation (GRIPS), Université du Québec À Chicoutimi (UQAC), Chicoutimi, QC, Canada
  • Sept 1994 – Sept 1996 Research Assistant, Département de Métallurgie et de Génie des Matériaux, Ecole Polytechnique de Montreal, Montreal, QC, Canada

Principal Publications of the Last Five Years

  • Chantal Binet, D. F. Heaney, R. Spina, and L. Tricarico (May 2005) “Experimental and numerical analysis of metal injection molded products,” Journal of Materials Processing Technology, 164–165, pp. 1160–1166.
  • D. F. Heaney, J. D. Gurosik, and Chantal Binet (Feb 2005) “Isotropic forming of porous structures via metal injection molding,” Journal of Materials Science, 40(4), pp. 973–981.
  • Chantal Binet, Kara L. Lencoski, D. F. Heaney, and R. M. German (Dec 2004) “Modeling of distortion after densification during liquid-phase sintering,” Metallurgical and Materials transactions A: Phisical Metallurgu and Materials Science, 35 A(12), pp. 3833–3841.
  • R. Zauner, Chantal Binet, D. F. Heaney, and J. Piemme (June 2004) “Variability of Feedstock Viscosity and its Effect on Dimensional Variability of Green Powder Injection Molded Components,” Powder Metallurgy, 47(2), pp. 151–156.
  • E. J. Westcot, Chantal Binet, and R. M. German (2003) “In Situ Dimensional Change, Mass Loss, and Mechanisms for the Solvent Debinding of powder Injection Molded Components,” Powder Metallurgy, 46(1), pp. 61–67.
  • Chantal Binet, D. F. Heaney, J. Piemme, and P. Burke (2002) “An Investigation of Particle Orientation and How it Relates to Anisotropic Shrinkage,” in proceedings PM2TEC 2002 World Congress, MPIF, June 16–21 Orlando Florida.
  • R. Zauner, D. F. Heaney, J. Piemme, Chantal Binet, and R. M. German (2002) “The Effect of Powder Loading on Dimensional Variability in PIM,” in proceedings PM2TEC 2002 World Congress, MPIF, June 16–21 Orlando Florida.

Consulting, Patents, and Scientific and Professional Societies of Which a Member

  • Ordre des Ingenieurs du Quebec (OIQ), Ingenieur Stagiaire (1995 – Present)

Honors and Awards

  • Scholarship Award, Fonds FCAR (1998)
  • Scholarship Award, Natural Sciences and Enginering Researche Council of Canada (NSERC) (1998)
  • First prize for Master Thesis, Canadian Institute of Mining, Metallurgy and Petroleum (1997)